Click To Call(904) 289-5931Click To Get A Free Estimate
Sealed brick paver driveway in front of a Middleburg home

Deeper color, full joints and less scrubbing

Paver Sealing in Middleburg, FL

Call (904) 289-5931 for a free sealing estimate on your Middleburg driveway, patio or pool deck.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.25 a sq ft to clean, sand and seal
Call Now(904) 289-5931

How soon can I get paver sealing in Middleburg?

A local contractor takes paver sealing jobs across Middleburg, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and booking is up to you. Start by calling (904) 289-5931.

Sealing deepens the color of your pavers, keeps sand in the joints and makes dirt and algae easier to rinse off. Picture a driveway gone gray at the edges and sandy at the seams, turned dark and even again with every joint packed. A driveway deals with tires and oil, and a pool deck deals with splash and bare feet, so each area gets its own plan. Say how each is used when you send a free estimate request.

Call (904) 289-5931

Two contractors laying sealer on a brick driveway, one spraying and one rolling
What's included

What is included when pavers are sealed in Middleburg?

Sealing breaks into four parts: a walk-through, a deep clean, fresh joint sand and the sealer coat. Cleaning usually takes the most time. To review them for your home, call (904) 289-5931.

Walk-through

The contractor measures the area and notes sunken spots, loose pavers, old sealer and places where water stands.

Deep clean

Algae, dirt and stains come off with cleaners matched to each problem and a gentle wash.

Joint sand

New sand fills the joints so pavers lock together and weeds get less room.

Sealer coat

The product goes on a dry surface, in one even pass, at the rate printed on its label.

How do I know my pavers need sealing?

Look for color that has gone chalky, joints sitting below the edges of the pavers, sand scattered across the drive after a storm and water that soaks in instead of beading. Catching sand loss early is cheaper than relaying pavers that have moved. For a quick opinion, call (904) 289-5931.

Which paver sealer suits a Middleburg home?

Sealers differ, and none suits every yard, so ask which one the contractor plans to use. Sealers come as water-based or solvent-based. Western Interlock warns that a solvent-based product can melt a plastic sprayer, which is one reason the tools differ from job to job. To compare options for your pavers, call (904) 289-5931.

Unilock adds that a sealer goes on best between 50 and 90 degrees, with 75 ideal. Shaded back patios and sunny front drives can call for different choices on the same lot. Ask which product goes where when you send a free estimate request.

Wet look or natural finish: which is right for me?

Choose a wet look for dark color with some shine, or a natural matte to stay close to how the pavers looked new. Beside a pool, grip counts for more than gloss, so ask about a lower sheen. Ask the contractor to show you both finishes on a test patch when you send a free estimate request.

How often should pavers be resealed in Middleburg?

Expect two to five years between coats. Safe Touch calls two to three years typical and says full sun, pool chlorine and storms push it toward two, while Unilock says three to five depending on traffic and exposure. A drive in open sun will sit near the short end, and a shaded walk near the long end. To have your coat checked, call (904) 289-5931.

Does more sealer give more protection?

No, and extra layers can backfire. Unilock says to seal in one continuous pass, because stacking layers over the same spot changes the gloss and can leave a whitish haze. Be careful with any offer built around extra coats, and ask about the rate on the label before you send a free estimate request.

When is the right time to seal pavers in Middleburg?

Pick a dry stretch. Safe Touch names October and November as the drier months, and Unilock asks for 24 to 48 hours of clear skies before the job and up to 48 hours of dry weather after it. Sealing wet pavers is how a coat turns milky. To line a day up with the forecast, call (904) 289-5931.

New pavers need patience. Unilock says to wait 60 to 90 days after the install, and longer if white efflorescence haze is still showing, which usually takes two to three months and sometimes a year. If your pavers are that new, mention the install date when you send a free estimate request.

Will sealing fix sunken pavers?

No, sealing will not lift pavers that have sunk or pulled away from the edge. Those sections have to be reset first, so ask whether the price includes that work. Joint sand also comes in different shades, and one close to your pavers looks more even. Bring up both when you send a free estimate request.

Surfaces

Which paver surfaces in Middleburg can be sealed?

Sealing suits a front drive, a lanai deck, a back patio or a side walk. Wear differs by area too, so the plan should follow how the spot is used. To start with yours, call (904) 289-5931.

Driveways

Tires, oil drips and open sun hit the driveway first. Sealing here matters most where cars turn and joint sand gets pushed out.

Pool decks and lanais

Splash water, chlorine and wet feet wear pool pavers every day. Sealing a pool deck should leave it clean without making it slick.

Back patios under trees

A patio in shade stays damp longer, and damp is what algae wants. Sealing a shaded patio is mostly about clearing the green and slowing its return.

Walkways and entries

Walks sit close to flower beds, mulch and sprinkler heads. Sealing the front walk is a small job, and every visitor notices it.

Common problems

What paver problems are common in Middleburg?

Five problems come up in Middleburg: sun fade, green growth, lost joint sand, orange irrigation marks and failed old sealer. To have yours looked at, send a free estimate request.

1. Sun fade on open driveways

An open driveway sits in direct sun for most of the day. Unprotected color turns chalky there first, and a fresh coat brings back depth.

2. Green growth under trees

Shade keeps pavers damp, and damp is what algae needs. Walkways on the north side of a house and patios under oaks go green first.

3. Joint sand lost to storms

Safe Touch says summer storms wash sand out of paver joints. Once the joints run low, pavers can shift and weeds take root.

4. Orange marks from irrigation

Iron in well water and reclaimed irrigation leaves orange stains, according to Safe Touch. Those marks need a rust treatment and a rinse before any sealer goes down.

5. Old sealer that has failed

A coat that has gone cloudy or started to peel has to come off first. Safe Touch strips failed sealer instead of coating over it.

Pricing

What does paver sealing cost in Middleburg?

Paver sealing in Middleburg commonly runs $1.75 to $3.25 per square foot, based on what Northeast Florida companies publish. Price follows square footage first, then condition. Orange stains, sunken sections and a failed old coat all add labor. To swap these ranges for a real number at your home, send a free estimate request.

Looking at cleaning first? See paver cleaning and joint sand, or view the service areas near paver sealing in Middleburg.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$525 to $975
600 sq ftTwo car driveway$1,050 to $1,950
1,000 sq ftLarge driveway or pool deck$1,750 to $3,250
1,500 sq ftDriveway plus pool deck$2,625 to $4,875

Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Paver pool deck beside a screened pool
Why choose us

Why hire a local paver sealing contractor in Middleburg?

A local contractor already works in the same sun, afternoon storms and tree shade your pavers face. You can ask for the price in writing and decide when you are ready. To begin, call (904) 289-5931.

Contractors who work in Clay County

A local contractor has seen what shade, storms and irrigation do to pavers around here. That makes the first visit about your surface and not a sales pitch.

A free look and a free price

The estimate is free, and you can pass on it after you hear the number.

Prices you can check

This site shows the per square foot range that Northeast Florida companies publish. A quote far above or below it is worth a question about what the price covers.

You set the pace

Ask for the price in writing and read it at your own speed. The contractor standards page covers what to confirm before you say yes.

How do I get a free paver sealing estimate?

Call, or send the short form. Expect a reply inside 1 business day, and often well before that.

Call (904) 289-5931

Free, no obligation

Joint sand packed tight between freshly sealed pavers
Photos

How do pavers look after sealing in Middleburg?

Freshly sealed paver driveway beside a lake with a small dock at a Middleburg home
Sealed paver pool deck at a Middleburg home
Sealed paver patio with a fire pit under tall pines at a Middleburg home
Sealed paver walkway to a front door at a Middleburg home
Close view of freshly sealed pavers at a Middleburg home
Paver area with one cleaned half beside a dirty half at a Middleburg home
Contractor cleaning pavers at a Middleburg home
Contractor sealing or sanding pavers at a Middleburg home
How it works

How does the paver sealing process work in Middleburg?

The paver sealing process runs in five steps, from the first measurement to a final walk-through. To get on the schedule, call (904) 289-5931.

1. Measure and look it over

For the sealing quote, the contractor measures the whole area. They note sunken spots, loose pavers, old sealer and any place where water stands.

2. Protect and wash

Before washing starts, plants and screens are covered and the sprinklers are switched off. A fanned nozzle held about a foot off the surface, per Unilock, keeps the joint sand in place.

3. Treat stains

Algae, rust and old residue each get a cleaner made for that job, tried on a small spot first.

4. Refill the joints

Once the pavers are dry, new sand is swept in and topped off. Polymeric sand needs about a day to dry before any sealer, says Unilock.

5. Seal and walk the job

When sealer is part of the price, it goes on in one even pass. After that, the contractor walks the area with you and gives the keep-off times for feet and cars.

Questions

Frequently Asked Questions

Is it good to seal pavers in Florida?

Yes, for pavers that have faded, lost joint sand or gone green. Sealing deepens the color, helps hold the sand and makes the surface easier to rinse. It is also a repeat cost, so ask how many years the product is rated for.

How long do paver sealers last?

Most last two to five years. Safe Touch, a Northeast Florida washing company, calls two to three years typical. Unilock, a paver maker, says three to five. Sun, pool chlorine and storms push a coat toward the short end.

How much does it cost to have pavers cleaned and sealed?

Safe Touch lists the full clean, sand and seal at $1.75 to $3.25 per square foot. At that rate, a 1,000 square foot driveway would cost between $1,750 and $3,250. Stripping failed sealer and fixing sunken pavers are priced on top.

Is it better to spray or roll paver sealer?

Either can work, and many contractors use both. Unilock lists a pump sprayer or a foam or short pile roller, and Western Interlock also describes spraying and then squeegeeing. What matters is an even coat in one pass.

Why is paver sealing so expensive?

Prep takes more hours than the sealer does, and the price follows the hours. A full job means washing, treating stains, refilling joints, waiting for everything to dry and then applying the coat. Safe Touch treats empty joints or a failed coat as a two day restoration job.

How much does it cost to seal a pool deck?

It follows the same per square foot range as any paver, about $1.75 to $3.25 from Safe Touch. A 500 square foot deck would land near $875 to $1,625. Ask which sealer goes on a surface that stays wet and carries bare feet.

Can sealed pavers in Middleburg get orange stains from well water?

Yes, they can. Safe Touch says iron in well water and reclaimed irrigation leaves orange stains. If your sprinklers use a well, ask the contractor how those marks will be treated and where the heads will be aimed.

How long does paver sealing take at a Middleburg home?

Plan on one to two days. The surface has to dry after washing, and Unilock asks for 24 to 48 hours of clear skies before sealing. An afternoon thunderstorm can bump the second day to later in the week.

Is it okay if it rains after sealing pavers?

Not right away. Unilock asks for up to 48 hours of dry weather while the sealer cures, and it says to turn the sprinklers off. Water can leave white marks or get trapped under the coat.

Ready to protect your pavers?

Send the short form or call, and a local contractor will get back to you inside 1 business day, usually much sooner.

Call (904) 289-5931

Free, no obligation